📍 Katy, TX 713-240-6473 Mon–Fri 8:00 AM – 6:00 PM

Window graphics.

Storefront vinyl, architectural privacy film, and conference-room branding — printed on the substrate that matches your application surface (first-surface, second-surface, glass-only), with adhesive or static cling depending on whether it's coming back off. Seven formats, sorted by viewing direction and removability.

01 · One-Way Perf 02 · 2nd-Surface Perf 03 · Static Cling 04 · Optically Clear 05 · Frosted 06 · Cut Lettering 07 · Double-Sided
§ 01 · See-through one direction
60/40 perf · One-way vision

One-Way Perforated Window Vinyl

Adhesive vinyl with a regular pattern of small holes (typically 60% printed material, 40% open) that lets people inside see out through the window while showing a full-color printed graphic to the outside world. The standard storefront and bus / vehicle window product when you want privacy and brand presence simultaneously.

Substrate

60/40 or 50/50 perforated adhesive vinyl with black backer.

Inside view

See-through (full daylight conditions). Slightly tinted at night.

Outside view

Solid graphic — the black backer prevents see-through from outside.

Overlaminate

Optical-clear vented overlaminate strongly recommended.

Outdoor life

2–4 years exterior, 5+ years interior-mounted.

Lead time

3–4 business days standard.

Good for

Storefront full-window branding · Restaurant window menus · Bus / shuttle rear-window advertising · Office windows that need both privacy and branding · Conference-room glass with company identity

60/40 PerfOne-Way VisionStorefrontOptical Laminate
§ 02 · Inside-mounted
Reverse-print · Glass-mount inside

Second-Surface Window Perf

Same perforated film logic, but printed in reverse and applied to the inside face of the glass — the graphic reads correctly from outside the window while the print itself is protected from weather, vandalism, and cleaning chemicals. The right pick for high-traffic retail and ground-floor storefronts in heavy-use districts.

Construction

Reverse-printed perf with adhesive on the print face.

Mount surface

Interior face of clean tempered or annealed glass.

Protection

Glass shields the print from rain, UV, abrasion, and graffiti.

Outdoor life

5–7 years protected behind glass.

Best use

High-pedestrian retail blocks, transit stations, exposed entryways.

Lead time

3–4 business days standard.

Good for

Downtown ground-floor retail storefronts · Transit station glazing · Restaurant entry doors and panels · Bank and pharmacy storefronts · Any window-graphic application where weather durability and tamper resistance both matter

2nd SurfaceReverse PrintTamper-Resistant5+ Year Life
§ 03 · No-adhesive, reusable
Static cling · Repositionable

Static Cling Window Decals

Vinyl that clings to glass through electrostatic adhesion rather than glue — peels off cleanly with no residue, can be re-applied repeatedly. The default for short-term promotions, sale signs, seasonal updates, and any window graphic that needs to come off in a month or two.

Substrate

White or clear static-cling vinyl, 7–8 mil.

Adhesion

Electrostatic — no adhesive, no residue, fully reusable.

Mount

First or second surface; clear cling on either side for see-through.

Best use

Short-term, repositionable, indoor or sheltered outdoor.

Outdoor life

3–6 months in direct exposure; indefinite indoors.

Lead time

2–3 business days standard.

Good for

Seasonal promotional window signs · Open / closed and hours-of-operation signs · Limited-time sale signs · Trade-show booth window kits · Window decals on rental / leased storefronts where adhesive isn't allowed

Static ClingNo ResidueReusableShort-Term
§ 04 · Floating graphic look
Optical-clear film · Print only the art

Optically Clear Window Decals

A near-invisible polyester film that renders only your printed art on the glass — no visible substrate around the graphic, no halo, no edge ring under daylight. White ink underlay supports color saturation on glass without the substrate showing. The premium pick for architectural-quality storefront branding and high-end retail glazing.

Film

2 mil optically clear polyester with crystal-clear adhesive.

Print method

UV inkjet with white ink underlay for opaque-color areas.

Visibility

Substrate disappears — only printed pixels show.

Cut

Contour-cut to graphic edge or kiss-cut on liner.

Outdoor life

4–6 years protected, 2–3 years direct exposure.

Lead time

3–5 business days standard.

Good for

High-end retail storefront branding · Conference-room and executive-office glass · Hotel lobby and reception glazing · Restaurant window graphics where the storefront design matters · Wayfinding on architectural glass

Optically ClearWhite InkContour-CutPremium
§ 05 · Etched-glass effect
Frosted vinyl · Privacy + branding

Frosted Vinyl & Privacy Films

Translucent etched-glass-look vinyl that obscures direct vision while preserving daylight transmission. Used for office privacy bands, conference-room logos, restroom doors, and any application where you'd otherwise pay for actual sandblasted glass. Also available with full-color print over the frost for branded privacy graphics.

Substrate

Cast frosted vinyl, etched-glass appearance.

Print option

Full-color CMYK over the frost for branded logos and patterns.

Cut

Custom shapes, perimeter bands, full-pane frosting.

Adhesive

Permanent or removable variants available.

Indoor life

10+ years on interior glass.

Lead time

3–4 business days standard.

Good for

Office privacy bands at sitting / standing eye level · Conference-room and executive-suite glass branding · Restroom and elevator-lobby door panels · Medical and dental practice waiting-area glass · Restaurant booth-divider glazing · Bathroom and shower stall glass

Frosted EtchPrivacy BandColor Over FrostInterior
§ 06 · Cut, not printed
Plotter-cut vinyl · Pre-spaced

Cut Window Lettering

Solid-color vinyl plotter-cut to letterforms and shapes, pre-spaced on application tape so the install drops onto the glass with no individual letter alignment work. The most cost-effective window-graphic format for hours-of-operation panels, single-color logos, phone numbers, and address signage.

Material

Cast or intermediate vinyl, single solid color per cut.

Application tape

Pre-masked, alignment-registered, install drops on as one piece.

Color range

50+ stock vinyl colors, gold/silver metallic, reflective.

Sizing

Letters from 0.5 in to 36 in single character.

Outdoor life

5–7 years cast, 3–5 years intermediate.

Lead time

2 business days standard.

Good for

Storefront hours-of-operation panels · Phone-number and address signage · Single-color storefront logos · Door identification (suite numbers, room names) · Quotes and brand statements on conference-room glass

Plotter CutPre-SpacedSingle ColorMetallic Option
§ 07 · Read from inside and out
Two-face print · Opaque between

Double-Sided Window Decals

A layered construction with one print readable from inside the building and a different print readable from outside, separated by an opaque blocker layer. Used for storefronts where the same window pulls double duty — branding the outside while showing service info to customers approaching from inside.

Construction

Two reverse-printed films laminated to a blocker layer.

Mount

Adhesive on one face, applied to glass interior.

Independence

Inside and outside art fully independent — no see-through bleed.

Sizing

Up to 54 in print width; cut to perimeter or kiss-cut.

Indoor life

3–5 years protected behind glass.

Lead time

4–5 business days standard.

Good for

Retail entry doors needing different inside / outside messaging · "Pull / push" inside-out door pairs · Storefront windows with brand outside and menu inside · Hours / wayfinding inside + branding outside · Reception desks with logo facing visitor + name facing staff

Two-Face PrintOpaque BlockerIndependent ArtStorefront

What to send us for a window job

  • Vector preferred — AI, EPS, or PDF/X with all fonts outlined.
  • Raster minimum — 150 DPI at finished size for window graphics (close-read in pedestrian zones).
  • Glass measurements — give us the glass dimensions (visible glass, not framed opening) plus mullion / frame intrusion. A photo with a ruler reference works.
  • Surface choice — first surface (outside) or second surface (inside-mounted reverse print). Critical for perf and clear film.
  • Bleed — 0.5 in around for trimmed pieces; 0.25 in for kiss-cut on liner.
  • Cut path — for contour-cut decals, supply a separate cut path layer or a clearly defined edge mask.
  • Upload through our artwork uploader (files up to 2 GB) or email info@pspimaging.com.

Ready to quote your window job?

Send us the glass dimensions and surface preference (interior or exterior mount) — we'll come back with pricing and a lead time within one business day.

Request a Quote Wholesale Quote Builder 📞 713-240-6473